The softball diamond is closely related to the baseball diamond, which is one of the oldest and most complex pieces of geometric symmetry in all of sports. Of course, not every field is constructed exactly the same. Fields all across the world differ in terms of distances of baselines, outfield fences, and the pitching rubber.
In the official rules of the International Softball Federation, the maximum outfield distance is stated to be 250 feet. Interestingly, this maximum is shared by both men and women. The variations in the distances are purely team-specific. While mens fields tend to be deeper, youth leagues and collegiate teams often have smaller outfields. These dimensions can also vary depending on the league.
The following are all taken from the official International Softball Federation rules, but apply universally to nearly every full-sized field in the world. Home Plate Area
- Home plate: The plate is a white rubber pentagon with one side measuring 17 inches in length from the base to the point. Two sides measure 8.5 inches in length, and two sides measure 12 inches in length. The two 12-inch sides form a point and face directly away from the pitchers rubber.
- Batters boxes: Both the right-hand and left-hand boxes measure 3 feet in width and 7 feet in length; each box is 6 inches away from home plate, positioned so the midpoints correspond to the midpoint of home plate.
- Catcher's box: The catchers box measures 10 feet in length from the back of home plate, and 8.5 feet in width.
- Pitcher's rubber: The rubber is a white slab, measuring 24 inches by 6 inches. The pitching rubber should be level with the ground.
- Pitcher's circle: The pitchers circle should be a measurement of an 8-feet radius around the pitchers rubber.
- First base: First base is a called a safety base or double base. It is the length of two bases, 15 inches wide and 30 inches long. The safety base is positioned across the first base line so that half of the base lies in fair territory and the other half lies in foul territory. The half that is in fair territory is painted white and the half that is in the foul territory is painted orange.
- Second and third base: Second and third base are white, measure 15 square inches, and are 3 to 5 inches thick. Third base is positioned entirely in fair territory. Second base lines up squarely with first base and third base, so that the four bases form a perfect 60-foot square.
- Distance from home plate to first base: 60 feet.
- Distance from first base to second base: 60 feet.
- Distance from second base to third base: 60 feet.
- Distance from third base to home plate: 60 feet.
- Width of each baseline: 3 feet.
- Infield size: From the third-base foul line to the first-base foul line, the back edge of the infield dirt is 60 feet from the pitchers rubber at all points (a radius, if you will).
- Coachs box: The coachs box is 15 feet in length and three feet in width; its positioned so the back of the box lines up evenly with the line from second base to third base, and from second base to first base; each box is eight feet from the foul lines.
- Distance from home plate to the pitchers mound: 43 feet.
- Distance from first base to third base (across the diamond): 84 feet, 10¼ inches.
- Distance from home plate to second base (across the diamond): 84 feet, 10¼ inches.
- Distance from home plate to the backstop (not mandatory): 25 to 30 feet.
It must be noted that many leagues and organizations throughout the world use variations of the above dimensions and standards for different levels of softball. Distances from home plate to the pitchers mound
- Womens fastpitch (HS and college): 43 feet
- Womens fastpitch (18/16/14 and under): 43 feet
- Womens fastpitch (12 and under): 40 feet
- Womens fastpitch (10 and under): 35 feet
- Mens fastpitch (18 and under): 46 feet
- Mens fastpitch (12 and under): 40 feet
- Mens fastpitch (10 and under): 35 fee
- Mens, womens, and co-ed slow pitch: 50 feet
Most players begin playing permanently on the official full-size field around the time they start high school. However, in many instances, fields do not subscribe exactly to the above dimensions (usually due to lack of space or resources). Infield dimensions vary depending on location and governing body, but all are designed to retain or closely mimic the proportions of the official dimensions.